+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] Transducer selection (/showthread.php?tid=4455)
[CA] Transducer selection - ashleyw - 12-24-17 08:27 PM
Hello, recently have had an Axiom Pro 12" installed with RV-100 and TM275LH-W. When I look at the channels I am not sure which are from the RV-100 and which are from the TM275LH-W.
are you able to help identify them?
RealVision 3D (RV-100)
SideVision (RV-100)
DownVision (RV-100)
Sonar
Chirp Low
Chirp High
Chirp High
Chirp AUTO
CW Low
CW High
CW High
RE: [CA] Transducer selection - Chuck - Raymarine - Moderator - 12-29-17 10:00 AM
Welcome to the Raymarine Forum Ashley,
The first group of sonar channel options (groups separated by blue line) which you have listed
- RealVision 3D
- SideVision
- DownVision
- Sonar
- Chirp Low
- Chirp High
are all associated with the RV100 transducer. Please note that the LightHouse v3.2.x software erroneously lists Sonar and CHIRP Low within this group. In a nutshell, the RV transducers support RealVision 3D, SideVision, DownVision, and CHIRP High sonar.
The bottom grouping of sonar channels prefixed with CW are all associated with the TM275LH-W. The CHIRP Auto option within this grouping will automatically select between CW-H and CW-L. As indicated above, the LightHouse v3.2.x software erroneously lists other options. This error will be corrected within a future LightHouse 3 software update.
RE: [CA] Transducer selection - ashleyw - 11-17-18 04:53 AM
Hello, has this been fixed with any software updates?
RE: [CA] Transducer selection - Chuck - Raymarine - Moderator - 11-19-18 09:55 AM
Ashley,
No fault has been previously identified. The following Fishfinder sonar channels are associated with the RV-100:
- RealVision 3D
- SideVision
- DownVision
- Sonar
The following Fishfinder sonar channels are associated with the TM275LH-W:
- CW Low
- CW High
- CW Auto