+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Autopilots (/forumdisplay.php?fid=23)
+--- Thread: [TG] Adding an EV1 Heading Sensor to Axiom? (/showthread.php?tid=4513)
[TG] Adding an EV1 Heading Sensor to Axiom? - pinkish_panther - 01-08-18 02:00 PM
I would like to have heading data on my NMEA 2000 network for the Axiom panel to use, the EV1 looks like the correct product but it is setup for a SeaTalkng network.
Is it easy/possible to connect the EV1 directly to the NMEA 2000 net without creating a separate SeaTalkng bus? Maybe an adapter cable between the EV1 and the NMEA T connector?
Thanks in advance for the help.
RE: [TG] Adding an EV1 Heading Sensor to Axiom? - Tom - Raymarine - Moderator - 01-08-18 10:08 PM
Hello pinkish_panther,
No problem. The only difference between STNG and vanilla NMEA2000 is the connector/cabling type: an adaptor cable is all you need. Part A06075 (http://www.raymarine.com.au/view/?id=5536) should do what you need.
Regards,
Tom
RE: [TG] Adding an EV1 Heading Sensor to Axiom? - pinkish_panther - 01-09-18 11:47 AM
Thanks for the quick answer and path to the correct cable!
RE: [TG] Adding an EV1 Heading Sensor to Axiom? - Chuck - Raymarine - Moderator - 01-10-18 09:38 AM
You're welcome.