[TG] Two displays - sharing AIS and charts? - Printable Version +- Raymarine forum (http://forum.raymarine.com) +-- Forum: Raymarine Forums (/forumdisplay.php?fid=1) +--- Forum: Multifunction Displays (/forumdisplay.php?fid=120) +--- Thread: [TG] Two displays - sharing AIS and charts? (/showthread.php?tid=4518) |
[TG] Two displays - sharing AIS and charts? - IcarusBop - 01-08-18 05:15 PM Hello: I have two Raymarine MFD's on board my yacht, one is a C-80 and the other a C-70. They are both connected to the SeaTalk network. Both units show all the transducer information (wind, compass, depth etc) fine. Can I share one chart onto the two displays, or do I need two separate charts? Thanks IcarusBop RE: [TG] Two displays - sharing AIS and charts? - Tom - Raymarine - Moderator - 01-08-18 09:48 PM Good day IcarusBop, C-series Classic were designed as single-station displays and have no capability to share graphical information such as charts, radar or sounder/fishfinder. The displays of that era that could do that were the E-series Classic (E80, E120). You will need separate charts in your C80 and C70. Regards, Tom RE: [TG] Two displays - sharing AIS and charts? - IcarusBop - 01-09-18 04:39 AM That's what I suspected - never mind, thanks very much for your response. RE: [TG] Two displays - sharing AIS and charts? - Chuck - Raymarine - Moderator - 01-10-18 09:38 AM You're welcome. |