+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] AXIOM Pro Micro SD Cards (/showthread.php?tid=4532)
[CA] AXIOM Pro Micro SD Cards - jkspain - 01-10-18 01:08 PM
I have an AXIOM Pro 12 RVX unit installed in my system and have a question about Micro SD card compatibility.
The existing Navionics Platinum+ Chart Micro SD is a SDSC 8 GB chip in slot 1 (upper slot). I put a SanDisk Micro SDXC 64GB in Slot 2 (for video recording and snapshots) but the AXIOM camera configuration menu said Slot 2 was (empty). I powered off the AXIOM, reversed the two chips, powerd on, confirmed the Nav Charts worked, and checked the camera configuration menu. Now it said Slot 1 (the slot with with SDXC chip) was empty.
The Lighthouse 3 manual says the SDXC should be compatible but I am thinking maybe not?? Please clarify.
Thanks,
Jon
RE: [CA] AXIOM Pro Micro SD Cards - Chuck - Raymarine - Moderator - 01-10-18 03:01 PM
Welcome to the Raymarine Forum Jon,
Please click here to view a FAQ addressing this subject. As indicated within the referenced FAQ, the 64GB microSD memory card likely has been formatted with a exFAT file system and will need to be reformatted with a FAT32 or NTFS file system.
RE: [CA] AXIOM Pro Micro SD Cards - jkspain - 01-10-18 08:33 PM
Thank you for clearing that up for me. I saw that table in the manual but missed the disconnect on the native file format.
Jon
RE: [CA] AXIOM Pro Micro SD Cards - Chuck - Raymarine - Moderator - 01-11-18 11:04 AM
You're welcome.