+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] Axiom navigation depth markings ? (/showthread.php?tid=4580)
[CA] Axiom navigation depth markings ? - WayneC - 01-20-18 07:01 PM
I have an Axiom 7 with the Navionics card installed. In the navigation screen with detailed layers set the depth markings are very hard to find. They are on the screen but not many. I’m comparing the screen to a third party chartplotter which had numerous depth footages compared to my Axiom. Am I doing something wrong?
RE: [CA] Axiom navigation depth markings ? - Chuck - Raymarine - Moderator - 01-23-18 04:04 PM
Welcome to the Raymarine Forum Wayne,
The Chart application's EasyView configuration setting (SETTINGS->LAYERS->EASYVIEW) is designed to declutter the chart. Such decluttering includes reducing the number of spot soundings which are displayed. It is recommended that you verify that the Chart application's EasyView configuration has been configured OFF.