+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Autopilots (/forumdisplay.php?fid=23)
+--- Thread: [CA] Footprint of p70s vs ST5000+ control head (/showthread.php?tid=4616)
[CA] Footprint of p70s vs ST5000+ control head - billworsley - 01-25-18 04:59 PM
I am upgrading my ST5000+ autohelm using the existing Type 1 drive but adding the Evolution ACU-200 sailboat pack with p70s control head. Will the new p70s control head fit in the same cut out on the navpod as the old ST5000+ control head?
RE: [CA] Footprint of p70s vs ST5000+ control head - Chuck - Raymarine - Moderator - 01-26-18 09:07 AM
Welcome to the Raymarine Forum Bill,
The footprint of a p70/p70S/p70R/p70RS autopilot control head is virtually identical to that of the ST5000+. The circular cut-out of the i70S/p70S/p70RS is the same as that of the ST5000+. The i70S/p70S/p70RS installation template may be found here.