+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [TG] 3D Mapping (/showthread.php?tid=4666)
[TG] 3D Mapping - Devocean - 01-31-18 06:39 PM
Hi Guys,
Have a slight glitch and looking for some advice.. I have:
3 x Axiom 9, True Vision RV220 (p&s) & a B60 (20 offset)
I was running the internal antenna for GPS on the Master, however found drop outs .. possibly dash related metal.
So I installed a RS150 External Antenna…
When I enter 3D Scan, (using GPS Lock) it doesn’t map the ocean floor anymore, however it still does under “rollingâ€
Yet the GPS works fine for all other applications
Any way you could simulate this
Thankyou
Ian Hall
RE: [TG] 3D Mapping - Tom - Raymarine - Moderator - 02-13-18 07:08 PM
Hello Ian,
One thing we have seen is some sounder views failing to draw properly after a software upgrade, until you either power-cycle the display. Occasionally we've seen instances where a display reset has been needed to put things back to normal (make sure you back up your data in Home > My Data > Import/Export before doing any reset). To do a reset, go to Home > Settings > This Display > Settings Reset.
If that doesn't solve the problem it may be that you've come across a software issue. In that case it would be good to know what version of software your Axioms are running: you can find this in Home > Settings. If you can let me know this, we'll investigate/replicate/resolve.
Regards,
Tom