[DG] Axiom 3d tansducer pair - Printable Version +- Raymarine forum (http://forum.raymarine.com) +-- Forum: Raymarine Forums (/forumdisplay.php?fid=1) +--- Forum: Fishfinders (/forumdisplay.php?fid=25) +--- Thread: [DG] Axiom 3d tansducer pair (/showthread.php?tid=4686) |
[DG] Axiom 3d tansducer pair - SIESTA BOTNIA 27.1 - 02-03-18 09:01 AM Hi All, I have a Botnia Targa 27.1 and have the twin 3D bronze with 20 degrees compensation as my hull is 19 degrees at midships. I have read the fitting instructions and it states to fit them parallel as close as possible to the hull centreline. They will be about 12 inches roughly apart or do I fit them closer as I could probably get them 6 inches apart obviously parallel ? Kk RE: [DG] Axiom 3d tansducer pair - Derek - Raymarine - Moderator - 02-09-18 10:01 AM Hi SIESTA BOTNIA Thank you for your enquiry, mounting the transducers 12" will be fine, in practice up to 36" apart is OK, just make sure they are parallel and equi-spaced from the keel. Regards |