Raymarine forum
[CA] Fuel management on Axioms? - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] Fuel management on Axioms? (/showthread.php?tid=4753)



[CA] Fuel management on Axioms? - tgades - 02-11-18 04:52 PM

On my A-series setup, I used the fuel manager capability to monitor flow and calculate total consumption (and it allowed me to manually put in my fuel tank size so it calculated gallons left).

I can't figure out how to do this on my Axiom-based system.


RE: [CA] Fuel management on Axioms? - Chuck - Raymarine - Moderator - 02-13-18 10:54 AM

Welcome to the Raymarine Forum tgades,

The subject feature has not yet been included within a LightHouse 3 software update. This feature request has been logged and is being considered for inclusion within a future LightHouse 3 software update. Please click here to view the LightHouse 3 FAQs web pages which address this and other LightHouse II software feature to be included within a future LightHouse 3 software update.


RE: [CA] Fuel management on Axioms? - tgades - 02-14-18 10:29 PM

Thank you. I'd think that very basic capability would be crucial to many users. With my A-series, "Fuel Remaining" was a persistent data field on most of the screens.

-tony


RE: [CA] Fuel management on Axioms? - Chuck - Raymarine - Moderator - 02-15-18 08:50 AM

Agreed.