+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Product Selection Assistance (/forumdisplay.php?fid=124)
+--- Thread: [CA] Cabling for e120 Classic (/showthread.php?tid=4802)
[CA] Cabling for e120 Classic - [email protected] - 02-18-18 01:30 PM
I need the proper cables to interface AIS and XM Sirius to MFD E120 Classic.
I have the following:
SAR 50 Antenna and SRX150 XM radio
RS130 Antenna
E120 Classic MFD
I need
1. The power cable for the SRX150
2. SMA-SMB Adapter
3. Ntwork Cable to E120
I will also be purchasing the AIS650 Transponder and Antenna
I do have a STNG bus already for the other instruments
Thanks
RE: [CA] Cabling for e120 Classic - Chuck - Raymarine - Moderator - 02-20-18 02:16 PM
Welcome to the Raymarine Forum sthomason,
Q1. I need:
Q1a. The power cable for the SRX150
A1a. The part number for the SR150 Power Cable is A80233. Please click here to view a FAQ addressing where one may purchase / order parts for Raymarine products.
Q1b. SMA-SMB Adapter
A1b. The part number for the SR150 SMA to SMB adapter is A80236.
Q1c. Network Cable to E120
A1c. The Ethernet Network socket of the SR150 will be interfaced to the Ethernet (SeaTalkhs) socket of E120 via an assembly constructed from an A80272 RayNet (M) to SThs (M) Adaptor and an appropriate length of RayNet (F) to RayNet (F) Cable.
Q2. How to interface an E-Series Classic MFD to an AIS650?
A2. Please click here to view a FAQ addressing this subject.