+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Fishfinders (/forumdisplay.php?fid=25)
+--- Thread: [CA] 3D Thru-Hull Split Pair Transducer (/showthread.php?tid=4808)
[CA] 3D Thru-Hull Split Pair Transducer - [email protected] - 02-19-18 06:14 PM
When installing Rv-220P and RV-220S transducers on a hull that has 18 degree deadrise angle, is it necessary to mount them with wedges or blocks, or are they designed to accommodate the angles ?
RE: [CA] 3D Thru-Hull Split Pair Transducer - Chuck - Raymarine - Moderator - 02-20-18 04:26 PM
Welcome to the Raymarine Forum Larry,
The RV-220P and RV-220S transducers are designed to be installed directly against the hull (i.e. no fairing blocks / wedges). These transducers feature angled elements to compensate for hull deadrise.