Raymarine forum
[CA] rmx 10 and axiom - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] rmx 10 and axiom (/showthread.php?tid=4862)

[CA] rmx 10 and axiom - boatman2 - 02-26-18 07:54 PM

I have 2 Axioms rv 9 networked together. Do I need two rmk 10 or will one work both.
I think I'll need a HS5 switch. Thank you.

RE: [CA] rmx 10 and axiom - Chuck - Raymarine - Moderator - 02-27-18 11:50 AM

Welcome to the Raymarine Forum boatman2,

Yes, a single RMK-9 or RMK-10 may be used to remotely control any Axiom / Axiom Pro MFDs within the system. You simply need to pair each MFD to the RMK-9 or RMK-10. As the Axiom MFDs feature only on Ethernet Network socket, a HS5 RayNet Network Switch will need to be installed within a system featuring two or more Axiom MFDs.