+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] Lighthouse 2 Routes (/showthread.php?tid=4888)
[CA] Lighthouse 2 Routes - trush640 - 03-02-18 04:41 PM
I have both an Axiom and e127 installed. I love how the Axiom shows the direction of a route. However, on my e127, I can never figure out if I should "follow the route" or "follow the route in reverse".
Is there a tip to know which direction to select on following routes with Lighthouse 2? For example, does it have anything to do with the vessel location or the last completed route?
It seems more often than not, that I pick the wrong direction and then have to "stop following" and then select the reverse path.
Thanks in advance!
RE: [CA] Lighthouse 2 Routes - Chuck - Raymarine - Moderator - 03-05-18 11:06 AM
Welcome to the Raymarine Forum trush640,
Q. On my e127, I can never figure out if I should "follow the route" or "follow the route in reverse". Is there a tip to know which direction to select on following routes with Lighthouse 2? For example, does it have anything to do with the vessel location or the last completed route?
A. Please click here to view a FAQ addressing this subject.