+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Autopilots (/forumdisplay.php?fid=23)
+--- Thread: (DG) spx 30 controller only drives one direction (/showthread.php?tid=4939)
(DG) spx 30 controller only drives one direction - rpackard - 03-07-18 08:08 PM
My Raymarine autopilot has an ST6002 display and an smart pilot x30 controller. This system worked for the past 8 years and now suddenly will only turn the rudder in one direction. All connections have been checked as well as the operation and set up of the rudder indicator.
Any suggestions on what might cause this?
Richard
RE: (DG) spx 30 controller only drives one direction - Derek - Raymarine - Moderator - 03-08-18 07:17 AM
Hi rpackard
Thank you for your enquiry.
We would first suggest testing the drive unit click here for details
If the drive tests out OK, then check the connections to and from the SPX30 and if these are all OK,then the course computer must be suspect and should be returned to our service workshop for further investigation.
regards