+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Product Selection Assistance (/forumdisplay.php?fid=124)
+--- Thread: [CA] transducer selection (/showthread.php?tid=5001)
[CA] transducer selection - David Fletcher - 03-16-18 02:09 PM
Might you be able to assist with the proper selection of a digital transducer for a 45 foot sail boat FRP hull. I was hoping to use a triducer DST and connect into a STng network. I see the A22154 with a wide cone and the A22111. I am planning to use an I70 I60 P70 and E97..
perhaps you can steer me in the right direction
thanks as always
David
RE: [CA] transducer selection - Chuck - Raymarine - Moderator - 03-16-18 04:01 PM
Welcome to the Raymarine Forum David,
Are you seek a transducer to support the MFD's fishfinder features, or are you simply seeking transducer to supply supplying these system with numerical depth, speed, and temperature data?
RE: [CA] transducer selection - David Fletcher - 03-16-18 09:51 PM
I need to supply data to the instruments I70 for speed depth and temp..not looking for fish data or sonar
I do want to be able to see the speed depth temp on the E97
RE: [CA] transducer selection - Chuck - Raymarine - Moderator - 03-19-18 08:24 AM
David,
Should you you simply seeking a transducer to supply supplying these system with numerical depth, speed, and temperature data, then the A22111 DST800 SMART Triducer may be used for this purpose.