+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Product and Feature Suggestions (/forumdisplay.php?fid=128)
+--- Thread: [CA] Sharing waypoints with Simrad (/showthread.php?tid=5056)
[CA] Sharing waypoints with Simrad - shewstring - 03-23-18 06:43 AM
I have a system of Axiom Pro 12, Axiom 9, and Simrad GO9 all connected via a NMEA 2000 network. The (2) Axioms are also connected via RayNet cables for Ethernet. The Simrad and Raymarine units see each on the NMEA network. The Simrad unit has a feature to transmit and receive waypoint data on NMEA 2K, however, I'm not finding any similar transmit or receive on the Raymarine units. Is this a feature I can't find, or a request for future NMEA PGN implementation consideration? Thank You
RE: [CA] Sharing waypoints with Simrad - Chuck - Raymarine - Moderator - 03-23-18 10:14 AM
Welcome to the Raymarine Forum shewstring,
Unfortunately, Raymarine MFDs running LightHouse II as well as those running LightHouse 3 software do not support waypoint/route transfer via their NMEA 2000 / SeaTalkng communications interfaces. A feature request will be logged to consider inclusion of this feature within a future LightHouse 3 sofware update. In the interim, should a third party chartplotting product support importing from or exporting to GPX files, then it would be recommended that you consider such transfers via a microSD memory card as an interim solution. When considering such transfers, the constraints of each chartplotting product must be considered. The waypoint/route/track constraints for MFDs running LightHouse 3 software may be found here.
Please click here more information concerning feature suggestions.
RE: [CA] Sharing waypoints with Simrad - shewstring - 03-24-18 08:34 PM
Thank You.
RE: [CA] Sharing waypoints with Simrad - Chuck - Raymarine - Moderator - 03-26-18 07:50 AM
You're welcome.