Raymarine forum
[CA] EV-400 Pilot Commissioning - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Autopilots (/forumdisplay.php?fid=23)
+--- Thread: [CA] EV-400 Pilot Commissioning (/showthread.php?tid=5111)



[CA] EV-400 Pilot Commissioning - barberhaulerr - 03-30-18 07:37 AM

I just installed an EV-400 pilot on a Defever 48. The EV-400 replaced a Simrad J300/AP21 pilot.
The RPU160 hydraulic pump was retained.
Steering ram capacity is 26.0". Does that indicate that I should select type 3 hydraulic pump as the drive type?
Thank you.


RE: [CA] EV-400 Pilot Commissioning - Chuck - Raymarine - Moderator - 03-30-18 02:32 PM

Welcome to the Raymarine Forum barberhaulerr,

As a Type 3 Hydraulic Pump would typically be used with a steering ram having a capacity of 26 cu. in., it would we recommended that the Type 3 Hydraulic Pump drive option be selected when running the Set-up Wizard.


RE: [CA] EV-400 Pilot Commissioning - barberhaulerr - 03-31-18 09:39 PM

Thank you!


RE: [CA] EV-400 Pilot Commissioning - Chuck - Raymarine - Moderator - 04-02-18 01:45 PM

You're welcome.