+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] Flush Mounted Axiom (/showthread.php?tid=5130)
[CA] Flush Mounted Axiom - Ooohaha - 04-04-18 09:15 AM
Hi,
I am having 4 Axiom 12" screens installed on my new Azimut, 2 upper helm and 2 lower helm. I have read that the sd card reader is on the back of the unit. How do I install the Navionics Platinum + card chart and any updates since the slot is not visible?
Thanks
RE: [CA] Flush Mounted Axiom - Chuck - Raymarine - Moderator - 04-04-18 03:07 PM
Welcome to the Raymarine Forum Ooohaha,
Please click here to view a thread in which I had previously addressed this subject.
RE: [CA] Flush Mounted Axiom - Ooohaha - 04-04-18 03:15 PM
Got it, Thanks!
If all my screens are networked, do I only need one card reader? I will have 2 Axiom displays on the fly and 2 Axiom displays at the main helm.
RE: [CA] Flush Mounted Axiom - Chuck - Raymarine - Moderator - 04-04-18 04:07 PM
Ooohaha,
Q. If all my screens are networked, do I only need one card reader? I will have 2 Axiom displays on the fly and 2 Axiom displays at the main helm.
A. As long as the MFD to which the Remote Card Reader will connected will be switched ON whenever the other MFDs are operated, then only one card reader will be required. However, should this not be the case, then you may want to consider installing one at each station.