Raymarine forum
[DG] Axiom Pro frequency - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Fishfinders (/forumdisplay.php?fid=25)
+--- Thread: [DG] Axiom Pro frequency (/showthread.php?tid=5134)

[DG] Axiom Pro frequency - Kristian - 04-04-18 02:26 PM


Im about to add tm185hw to my Axiom Pro. Is it possible to use it with fixed frequency? For example 150kHz or 250kHz.

Im little bit worried, that there might be some interference between rv100 and tm185hw.

RE: [DG] Axiom Pro frequency - Derek - Raymarine - Moderator - 04-10-18 07:36 AM

HI Kristian

There will be no interference between the transducers, since the built-in interference rejection will deal with this.

In the current AXIOM Software, you can select 'CW' which will be the centre frequency of the specific transducer - in this case circa 160kHz.