+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: RMK-9 / RMK-10 Power button will not switch MFD(s) ON (/showthread.php?tid=5155)
RMK-9 / RMK-10 Power button will not switch MFD(s) ON - Chuck - Raymarine - Moderator - 04-06-18 12:58 PM
RMK-9 / RMK-10 Power button will not switch MFD(s) ON
While the Power button of a RMK-9 or RMK-10 may be used to switch an a/c/e/gS-Series MFD or Axiom/Axiom Pro MFD OFF, the RMK-9 and RMK-10 are not designed to switch these MFD's ON. Accordingly, these MFDs must be switched ON via their respective Power buttons. Please note that Raymarine MFDs feature a last power state memory feature, permitting the MFD's to be also be switched ON/OFF via the power circuit supplying the MFD(s). To learn more about the MFD's last power state memory feature, click here.
RAYFAQ#