Raymarine forum
[CA] 2 axiom 9s - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Product Selection Assistance (/forumdisplay.php?fid=124)
+--- Thread: [CA] 2 axiom 9s (/showthread.php?tid=5160)



[CA] 2 axiom 9s - Toddfore - 04-08-18 09:08 AM

If I have an axiom 9 on the bow without 3D view but have one at the console with 3D view, can I network them and see the 3D view from the bow unit? How do I order a unit with a trolling motor transducer?


RE: [CA] 2 axiom 9s - Chuck - Raymarine - Moderator - 04-09-18 02:09 PM

Welcome to the Raymarine Forum Toddfore

Q1. If I have an axiom 9 on the bow without 3D view but have one at the console with 3D view, can I network them and see the 3D view from the bow unit?
A1. Yes, only one of the MFDs within the system need have internal RealVision fishfinder circuitry. The two MFDs would be interfaced to one another via an appropriate length of RayNet (F) to RayNet (F) Cable.

Q2. How do I order a unit with a trolling motor transducer?
A2. The RV-100 RealVision Transducer would be ordered from an authorized Raymarine dealer for either transom mounted, [censored] plate mounted, or trolling motor mounted applications. While Raymarine does not offer trolling motor mounts for the RV transducers, they are available from third party transducer accessory manufacturers.