+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Instruments (/forumdisplay.php?fid=117)
+--- Thread: Wind Vane Cable (/showthread.php?tid=522)
Wind Vane Cable - Dancini - 04-04-16 04:51 PM
Dear Moderator, I need just the cable for a wind vane (E22078), may I have the part number to order the cable ? Thanks
RE: Wind Vane Cable - Steve - Raymarine - Moderator - 04-05-16 02:42 PM
It is sold as a hardwired masthead base and 30M cable, part number A28162. You will twist lock the masthead to the base. We also sell with 50M of cable, part number A28163.
RE: Wind Vane Cable - spencerdd - 01-07-17 03:33 PM
Hello Raymarine Moderator,
I have an ST50 display and masthead unit but I'm getting inaccurate wind direction. After following the trouble shooting tips from another thread, I'm fairly certain that I have a bad cable. Will the A28162 connector at the masthead fit my ST50 wind instrument? (I don't know the part number of the ST50 masthead unit)
Thanks
Dave.
RE: Wind Vane Cable - Chuck - Raymarine - Moderator - 01-09-17 10:30 AM
Welcome to the Raymarine Forum spencerdd,
The hardwired masthead base and 30M cable, part number A28162, may indeed be used to replace that which had been used with a ST50 Wind Transducer.