+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Radar (/forumdisplay.php?fid=125)
+--- Thread: [CA] radar not displaying on chart (eS128) (/showthread.php?tid=5273)
[CA] radar not displaying on chart (eS128) - wknudsen - 04-24-18 11:49 AM
The radar (quantum) is on and showing images in the radar screen. Going into chart, radar /AIS, show radar, there is no radar overlay showing on the chart. AIS targets are showing on the chart.
RE: [CA] radar not displaying on chart (eS128) - Chuck - Raymarine - Moderator - 04-25-18 10:45 AM
Welcome to the Raymarine Forum wknudsen,
Sources of heading (not to be confused with GPS COG) data include autopilots, instrument heading sensors, etc.. Has the eS128 been interfaced to a source of heading data? If so, ensure that the device which supplies the system with heading data switched ON and that the Heading data item is populated when attempting to overlay the chart with radar. Should the system not be interfaced to a source of heading data, then please click here to view a FAQ addressing under what conditions the radar imagery may be layered atop the cartography displayed within the Chart application using GPS COG.