+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Product Selection Assistance (/forumdisplay.php?fid=124)
+--- Thread: [CA] Digital Depth Transducer for Axiom 9? (/showthread.php?tid=5275)
[CA] Digital Depth Transducer for Axiom 9? - DwainDouglas - 04-24-18 02:20 PM
Which transducers can I select from for digital depth only with two Axiom 9's (E70366), one i70, and an iTC-5? I'd like a low-profile through hull (fiberglass) with about 10-15 deg deadrise (but have not measured yet).
Or should I go with one of the E70367-02 or E70367-03 for some reason, even though I do not need fish finder/bottom machine functionality, only digital depth?
Autopilot will be updated to Evolution later this year, if that has any bearing.
Thanks!
Dwain
RE: [CA] Digital Depth Transducer for Axiom 9? - Chuck - Raymarine - Moderator - 04-26-18 01:20 PM
Welcome to the Raymarine Forum Dwain,
I would be recommended that an A22112 DT800-12 Plastic Thru Hull or A22147 DT800-12 Bronze Thru Hull transducers be used with the fiberglass hull having the specified deadrise to simply satisfy supplying the system with numerical depth data.