+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] C97 connection to older Yamaha (/showthread.php?tid=5282)
[CA] C97 connection to older Yamaha - Iwhitevt - 04-24-18 10:00 PM
Is it possible to replace my 2006 yamaha digital gauges by interfacing the motors to my c97's?
If yes, is there additional information on this? Would it monitor all the same functions- rpm, fuel use, alerts, etc?
Thanks!
RE: [CA] C97 connection to older Yamaha - Chuck - Raymarine - Moderator - 04-25-18 04:15 PM
Welcome to the Raymarine Forum Iwhitevt,
Please click here to view a FAQ addressing this subject. Should you determine that your engines feature Yamaha Command Link or Command Link Plus, then please click here to check your engines against the list of Yamaha engines supported by the ECI-100 Engine Gateway. The list of supported engine data items will vary will the data output by the engines. See the previously referenced FAQ for a list of possible engine data items which may be displayed.