Raymarine forum
[CA] e7 MFD Screen Malfunction - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] e7 MFD Screen Malfunction (/showthread.php?tid=5325)

[CA] e7 MFD Screen Malfunction - cptdoug1 - 04-30-18 10:54 AM

My e7 MFD's screen has turned green and has vertical lines on it. This happened as I sailed to Guatemala where I am now. Are there any known fixes for this?

RE: [CA] e7 MFD Screen Malfunction - Chuck - Raymarine - Moderator - 05-01-18 09:42 AM

Welcome to the Raymarine Forum Doug,

It is recommended that the loaded system voltage be measured at the display's power plug. Should the measured voltage be within the operating range of the MFD (10.8V dc to 31.2V dc) and the MFD's screen have the specified appearance after being switched ON, then it would be recommended that the MFD be sent to Raymarine’s Product Repair Center to be bench checked / serviced.