Raymarine forum
[CA] Water temperature - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] Water temperature (/showthread.php?tid=5333)

[CA] Water temperature - slyluna - 05-01-18 10:23 AM

We added an Axiom pro and a rv100 transducer. We kept a 1KW airmar transducer that was connected to a cp 370, We removed the cp 370 because it was no longer needed. Now I don't get a water temperature reading. It's on the screen but does not give me a temperature. Please advise.

RE: [CA] Water temperature - Chuck - Raymarine - Moderator - 05-03-18 03:12 PM

Welcome to the Raymarine Forum slyluna,

What version of LightHouse 3 software is installed within your MFD?

RE: [CA] Water temperature - slyluna - 05-03-18 03:44 PM

I have 3.4.66. If I unplug the 1 KW airman b260 then i'm getting temperature from the rv100. Maybe the temp isn't working on the b260. There doesn't appear to be a way to switch over to the rv100. If it is my b260, can I add your ST 69 speed/temp transducer and network it into the system? It seems that the MFD wants to default to the stronger transducer. Thank you for your response

RE: [CA] Water temperature - Chuck - Raymarine - Moderator - 05-04-18 10:32 AM


Please click here to view a FAQ addressing Temperature source prioritization within a system of MFDs running LightHouse 3 software ... particularly the last paragraph of this FAQ.