Raymarine forum
[CA] Seeing own boat as AIS target - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: AIS (/forumdisplay.php?fid=22)
+--- Thread: [CA] Seeing own boat as AIS target (/showthread.php?tid=5344)



[CA] Seeing own boat as AIS target - Mick - 05-02-18 03:44 PM

We are getting our own boat as an AIS target on the Axiom Pro MFD's.(Axiom pro 9 & 15) We updated the software on the MFD's and just did the software update to the Raymarine AIS 650, via the SD card.

We are still getting the AIS target. This is a problem because we can't delete it and it is blocking the boat icon on the screen.

Any input is appreciated.


RE: [CA] Seeing own boat as AIS target - Chuck - Raymarine - Moderator - 05-04-18 12:32 PM

Welcome to the Raymarine Forum Mick,

Please specify how you have interfaced the AIS650 to your MFD ... via SeaTalkng/NMEA 2000, via NMEA 0183, or both. Please additionally specify whether the system includes any additional AIS receiver or transceivers such as one which may be part of a VHF radio.


RE: [CA] Seeing own boat as AIS target - Mick - 05-08-18 06:23 AM

We found that the Icom VHF was picking up the Raymarine AIS650 & displaying the target over nmea2k. We blocked the MMSI # in the Icom and that took care of the problem.


RE: [CA] Seeing own boat as AIS target - Chuck - Raymarine - Moderator - 05-08-18 08:10 AM

You're welcome.