+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Instruments (/forumdisplay.php?fid=117)
+--- Thread: [CA] Wind Transducer (/showthread.php?tid=5395)
[CA] Wind Transducer - Drew - 05-08-18 12:11 PM
Hello, I have older Raytheon ST60's and I am not getting a wind speed indication and the cups are not spinning (recently lubed and it spun briefly). Please advise if a R28170 or a R28171 are "plug and play" with the Raytheon?? Do you think replacing the transducer is what I need to do??
RE: [CA] Wind Transducer - Chuck - Raymarine - Moderator - 05-08-18 12:29 PM
Welcome to the Raymarine Forum Drew,
The R28170 or a R28171 Masthead Wind Transducers are indeed designed for use with ST60 Wind instruments. However, these mastheads are not compatible with ST50 and ST50+ Wind Instruments and wind instrument designs preceding these. Should you opt to have your R28170 or a R28171 Masthead Wind Transducer serviced, it may be sent to Raymarine’s Product Repair Center to be bench checked / serviced. After repairing or replacing a wind transducer, the wind instrument must be re-calibrated.
RE: [CA] Wind Transducer - Drew - 05-08-18 04:02 PM
Hi Chuck, thank you for the welcome and for the information, much appreciated!
RE: [CA] Wind Transducer - Chuck - Raymarine - Moderator - 05-09-18 08:50 AM
You're welcome.