+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Fishfinders (/forumdisplay.php?fid=25)
+--- Thread: [CA] DSM300 to eS-Series Display (/showthread.php?tid=5411)
[CA] DSM300 to eS-Series Display - [email protected] - 05-09-18 02:03 PM
Hello
I have a DSM300 connects to E120 display, but i've bought a new eS display, could you connect them by Raynet?
Thanks for your help
RE: [CA] DSM300 to eS-Series Display - Chuck - Raymarine - Moderator - 05-11-18 11:03 AM
Welcome to the Raymarine Forum jegrental,
Indeed a DSM300 may be interfaced to an eS-Series MFD via Ethernet communications. When replacing an E-Series MFD with an eS-Series MFD communications between the MFD and the DSM would be accomplished by simply unplugging the SeaTalkhs Cable from the MFD and then connecting an A80160 SeaTalkhs (F) to RayNet (F) Adapter to the SeaTalkhs cable and then connecting the other end of the adapter to either of the eS-Series MFD's Ethernet Network sockets (RayNet (M)).