Raymarine forum
[CA11] trigger output voltage - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA11] trigger output voltage (/showthread.php?tid=5529)



[CA11] trigger output voltage - kfrenier - 05-22-18 07:46 AM

i have an e80 classic and the raydome will not rotate. i checked the voltage of the trigger outage and got 2.7 volts.Is this the right voltage?


RE: [CA11] trigger output voltage - Chuck - Raymarine - Moderator - 05-22-18 01:25 PM

Welcome to the Raymarine Forum kfrenier,

Please note that diagnostics and product repair information supported by Raymarine Product Support is limited to identifying the product, not component, not component which is believed to have failed within the system. Should the radome feature an analog video interface (i.e. it's radar cable connects directly to the MFD's Radar socket (not SeaTalkhs socket)), then Please click here to view a FAQ addressing troubleshooting problems with such radomes.