+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] [CA11] Axiom to St8002 (/showthread.php?tid=5639)
[CA11] Axiom to St8002 - halkau - 06-01-18 12:17 PM
I have 2 new Axiom Pro units and the ST8002 is not showing up on them. I have an IPS course computer and the auto pilot is now connected to an ST/ST NG converter. Any suggestions? Would just changing the control head to a p70rs do the trick?
Thank you
RE: [CA11] Axiom to St8002 - Chuck - Raymarine - Moderator - 06-01-18 12:44 PM
Welcome to the Raymarine Forum halkau,
Q. Would just changing the control head to a p70rs do the trick?
A. Negative. Please click here to view a FAQ addressing this subject. Should it be desired to utilize LightHouse 3's Autopilot Controls feature, then it would be necessary to replace the autopilot control head with a p70RS Autopilot Control Head and the autopilot course computer with an Evolution EV-2 CCU.
RE: [CA11] Axiom to St8002 - halkau - 06-01-18 02:45 PM
Thank you for the rapid response
RE: [CA11] Axiom to St8002 - Chuck - Raymarine - Moderator - 06-01-18 03:35 PM
You're welcome.