+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] [CA11] Further questions about WiFi connectiions to gS MFD (/showthread.php?tid=5658)
[CA11] Further questions about WiFi connectiions to gS MFD - rycsailor - 06-03-18 07:52 PM
If I read the information correctly, I can connect the Quantum 2 chirp via WiFi to the gS MFD equipped with Lighthouse v3.4.66 for the data link. This means that the radome only requires a power connection and installation becomes that simple? Is this a correct assumption?
RE: [CA11] Further questions about WiFi connectiions to gS MFD - Chuck - Raymarine - Moderator - 06-04-18 02:49 PM
Welcome to the Raymarine Forum rycsailor,
Q. This means that the radome only requires a power connection and installation becomes that simple?
A. As long as the signal strength received from the MFD at the Quantum 2 radome's installation location is sufficiently strong, then one only need install the Quantum 2 radome's power cable. Please click here to view a FAQ providing additional detail on the signal strength received from the MFD at the Quantum 2 radome's installation location.