+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Instruments (/forumdisplay.php?fid=117)
+--- Thread: I50 tridata termination? (/showthread.php?tid=570)
I50 tridata termination? - Johnjohnjohn - 04-11-16 11:29 AM
I have an i50 tridata that is replacing an st60 tridata. I have used the seatalk ng to seatalk connector cable to connect it to the remaining st60 and it appears to work OK. There is a remaining seatalk ng connector on the i50 which is not in use. Does that need the supplied terminator, or is OK just left unused? Thanks.
RE: I50 tridata termination? - Steve - Raymarine - Moderator - 04-11-16 03:12 PM
That Seatalk NG port is if you connected via Seatalk NG interface to daisy chain with a spur cable (up to two). You are using the Seatalk 1 communication. The connector should be left unused.
RE: I50 tridata termination? - Johnjohnjohn - 04-11-16 03:26 PM
(04-11-16 03:12 PM)Steve - Raymarine - Moderator Wrote: That Seatalk NG port is if you connected via Seatalk NG interface to daisy chain with a spur cable (up to two). You are using the Seatalk 1 communication. The connector should be left unused.That's great, thanks for the quick response. John
RE: I50 tridata termination? - Steve - Raymarine - Moderator - 04-12-16 09:09 AM
Anytime, contact us with any future questions.