+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] [CA11] Retransmit AIS data from NMEA0183 to e95 on the SeatalkNG network (/showthread.php?tid=5720)
[CA11] Retransmit AIS data from NMEA0183 to e95 on the SeatalkNG network - JonasE - 06-09-18 08:52 AM
I have a mix of Seatalk and SeatalkNG devices that I gradually want to replace.

Currently I have an AIS connected to the e95 (Lighthouse II, R19) via NMEA0183. The AIS only supports NMEA0183 and I don’t want to replace my AIS. The e95 is connected to a SeatalkNG network with a couple of i70 among others. Â
* The AIS is connected to the e95 through NMEA 0183
* The e95 and one i70 are connected to a SeaTalk to SeaTalk NG converter on the STNG device ports
* The old Seatalk network is connected to the Seatalk port on the SeaTalk to SeaTalk NG converter
* On the Seatalk network the following devices are conntected:
- ST60 Speed,
- ST60 Depth,
- i60 Wind,
- Wind transducer,
- Logg transducer,
- Depth transducer,
- RN300 GPS,
- ST6001,
- SmartPilot S2G,
S100 Remote
Is there any way to retransmit the AIS data from the AIS through the e95 onto the SeatalkNG network so I can show AIS data on the i70?
Want to keep using my AIS that I like and spend my money on gradually upgrading to SeatalkNG and install i70S displays. the ITC-5 and later a new Autopilot instead of replacing the AIS.
RE: [CA11] Retransmit AIS data from NMEA0183 to e95 on the SeatalkNG network - Chuck - Raymarine - Moderator - 06-12-18 02:46 PM
Welcome to the Raymarine Forum Jonas,
Please click here to view a FAQ addressing this subject.
RE: [CA11] Retransmit AIS data from NMEA0183 to e95 on the SeatalkNG network - JonasE - 06-13-18 08:30 AM
Thank for the welcome Chuck and thanks for adding the FAQ related to this topic.
BR
Jonas
RE: [CA11] Retransmit AIS data from NMEA0183 to e95 on the SeatalkNG network - Chuck - Raymarine - Moderator - 06-13-18 08:49 AM
You're welcome.