+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] [CA11] How do you program COG Line on Axiom? (/showthread.php?tid=5801)
[CA11] How do you program COG Line on Axiom? - Doug Brown - 06-16-18 03:16 PM
My friend has a new Axiom plotter, and I can't find where to program the COG line. Can you help please?
RE: [CA11] How do you program COG Line on Axiom? - Chuck - Raymarine - Moderator - 06-18-18 03:26 PM
Welcome to the Raymarine Forum Doug,
As vectors are associated the vessel icon, holding one's finger pressed atop the vessel icon within the Chart application will cause a vessel icon context menu to be displayed. From this context menu, the operator may select to display the COG (vessel must be moving) and/or Heading (system must be interfaced to a heading source) vectors as well as to configure the length of these vectors.
RE: [CA11] How do you program COG Line on Axiom? - Oregoncme - 06-19-18 09:24 AM
Chuck, THANKYOU.
Where, or in what manual, would point this out?
Can you provide a link?
RE: [CA11] How do you program COG Line on Axiom? - Chuck - Raymarine - Moderator - 06-19-18 09:54 AM
Oregoncme,
This may be found within the Vessel Details section Chapter 8.1 Chart app overview (more specifically page 96) of the LightHouse 3.4 Advanced Operation Instructions.
RE: [CA11] How do you program COG Line on Axiom? - Doug Brown - 06-19-18 02:43 PM
You are right on the money Chuck!
Thank you very much!
RE: [CA11] How do you program COG Line on Axiom? - Chuck - Raymarine - Moderator - 06-19-18 03:55 PM
You're welcome.