Raymarine forum
[CA] [CA11] Depth Transducer Offset - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Instruments (/forumdisplay.php?fid=117)
+--- Thread: [CA] [CA11] Depth Transducer Offset (/showthread.php?tid=5971)

[CA11] Depth Transducer Offset - rroberts76 - 07-02-18 12:27 PM

I have a NMEA 2000 depth transducer on the network, NOT a Raymarine Sonar Module, and an Axiom 9 PRO. The Axiom reads the data but I can't seem to calibrate/configure it. How can I go about accessing and setting the transducer offset with the Axiom/Lighthouse?


RE: [CA11] Depth Transducer Offset - Chuck - Raymarine - Moderator - 07-03-18 10:23 AM

Welcome to the Raymarine Forum rroberts76,

Please click here to view a FAQ addressing this subject. As indicated therein, Raymarine's MFD running LightHouse II or LightHouse 3 software, i50 Instruments, i60 Instruments, and i70 MFIDs are not designed to calibrate, apply offsets in conjunction with, or configure alarms in conjunction with third party NMEA 2000 sensors.