Raymarine forum
[DG] [DG] changing depth display - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Instruments (/forumdisplay.php?fid=117)
+--- Thread: [DG] [DG] changing depth display (/showthread.php?tid=5986)

[DG] changing depth display - aly - 07-03-18 11:31 AM

Hello there,

I have a "new to me" sailboat with the Raymarine ST60 Plus depth sounder, and it will not display the depth in metres... I have followed the instructions in the owner's manual, and it cycles to feet, metres and fathoms, but I cannot set it to metres (it is currently set to feet and I can set it to fathoms).

thank you from metric Canada!!

RE: [DG] changing depth display - Derek - Raymarine - Moderator - 07-04-18 11:25 AM

HI aly

Thank you for your enquiry.

The units are set on the master display. Is the display that you are trying to set the units on the one that is connected to the transducer? If no, then set the units on the display which is connected to the transducer.

if yes, then is there another display in the system, for example multifunction display which is setting the units too?