Raymarine forum
[CA] [CA11] Connectors - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Instruments (/forumdisplay.php?fid=117)
+--- Thread: [CA] [CA11] Connectors (/showthread.php?tid=5993)



[CA11] Connectors - Polaris - 07-04-18 02:11 PM

What advice can you give converting flat electrical connectors to 5 pin DIN connectors for Remote ST60 wind, speed, depth, and auto helm instruments located with a slave C80 Mfd in the cockpit with a C90W at the inside helm of a PacificSeacraft motor sailor?


RE: [CA11] Connectors - Chuck - Raymarine - Moderator - 07-06-18 12:35 PM

Welcome to the Raymarine Forum Polaris,

Generally speaking, Raymarine recommends use of its networking components for maximum system performance within a marine environment. Any third party cables and connectors chosen should be designed for use within the marine environment. Gemeco, Inc. (Airmar’s US distributor (803 693 0777)), carries a number of such networking components.