+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] [CA11] ES98, CP200, CP100 guidance (/showthread.php?tid=6133)
[CA11] ES98, CP200, CP100 guidance - MartynCat - 07-18-18 03:19 AM
Hello,
Have bought a boat with an ES98 unit fitted with a CP100 Downvision transducer. Don't know how. Does it connect directly to the ES98 or could it be connected via a network switch? I have also bought a CP200 Sidevision sonar module (Used)and new transducer which needs is connected to the ES98 head unit. Can the CP200 be connected directly or does it connect to the ES98 through a network switch? What am I missing? Network switch? Cables? Which ones please? Also the CP200 sonar unit is missing its power cable. Where can buy one from please? What is the part number. Thanks.
RE: [CA11] ES98, CP200, CP100 guidance - Chuck - Raymarine - Moderator - 07-19-18 03:30 PM
Welcome to the Raymarine Forum MartynCat,
The ax8 MFDs and eSx8 MFD feature internal DownVision sonar circuitry permitting their Transducer socket to be directly mated to a compatible DownVision or CPT-S transducer. The Ethernet Network (RayNet) communications socket of the MFD may be interfaced to a CP200 via an appropriate length of RayNet (F) to RayNet (F) Cable. The CPT-200 SideVision transducer will plug directly into the transducer socket of the CP200. A HS5 RayNet Network Switch would only be necessary if both of the MFD's Ethernet Network communications sockets are already in use.