+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] [CA11] C140W charts do not show water depths (/showthread.php?tid=6158)
[CA11] C140W charts do not show water depths - mistertj - 07-20-18 09:44 AM
My C140W MFD with or without Navionics chart card does not display water depths. Same card in my E120 Classic displays lots of data. What might the problem be? All other functions seem normal.
RE: [CA11] C140W charts do not show water depths - Chuck - Raymarine - Moderator - 07-25-18 01:56 PM
Welcome to the Raymarine Forum mistertj,
It is recommended that you verify that the Chart application's page's Declutter feature (PRESENTATION->DECLUTTER) has been configured to OFF. Should the problem persist thereafter, then it would be recommended that a Factory Reset operation be performed to correct this behavior.
RE: [CA11] C140W charts do not show water depths - mistertj - 07-25-18 05:22 PM
Hi Chuck - Success! I did the declutter off and that brought back too much data so I did the reset. All fixed...thank you.
RE: [CA11] C140W charts do not show water depths - Chuck - Raymarine - Moderator - 07-26-18 07:43 AM
You're welcome.