+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Instruments (/forumdisplay.php?fid=117)
+--- Thread: [CA] [CA11] i70 versus i50 for ST60+ Upgrade (/showthread.php?tid=6165)
[CA11] i70 versus i50 for ST60+ Upgrade - Dan_Y - 07-21-18 09:00 AM
I’m contemplating replacing my aging ST60+ depth and speed instruments, incorporate an ITC-5 for better speed calibration, and maintain a large-number, dedicated display for each data type.
Is there a version of the i50 that is “display-only, without the transducer interfaces versus using i70s as dedicated displays?
Thanks,
Dan
RE: [CA11] i70 versus i50 for ST60+ Upgrade - Chuck - Raymarine - Moderator - 07-23-18 03:40 PM
Welcome to the Raymarine Forum Dan,
The i50 and i60 Instruments may be purchased with or without a transducer(s). When not interfaced to a transducer, these instruments may repeat instrument data from the system.
RE: [CA11] i70 versus i50 for ST60+ Upgrade - Dan_Y - 07-26-18 07:23 PM
Chuck -
Okay, thanks Chuck. I was just wondering if there was a simple, “display-only†p/n of the i50s without the transducer interface electronics.
Dan
RE: [CA11] i70 versus i50 for ST60+ Upgrade - Chuck - Raymarine - Moderator - 07-27-18 08:13 AM
Dan,
Raymarine does not offer display only versions of the i50 instrument, as this function is performed by the i70S MFID.
RE: [CA11] i70 versus i50 for ST60+ Upgrade - Dan_Y - 07-27-18 07:38 PM
Thanks for the clarification Chuck. Dan
RE: [CA11] i70 versus i50 for ST60+ Upgrade - Chuck - Raymarine - Moderator - 07-27-18 08:50 PM
You're welcome.