+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [TG] Password for Axiom 7 (/showthread.php?tid=6222)
Password for Axiom 7 - David Goad - 07-27-18 04:29 AM
I can't find the network password on my axiom. on the setting/this display menu all I get is;
Starting page
External keypad
Quantum Radar
Reset
Screen shot
Clear pairings Factory Reset.
Any idea how I can obtain the password? the Axiom network is showing on my iPad, I just need a password.
RE: Password for Axiom 7 - Tom - Raymarine - Moderator - 07-30-18 02:10 AM
Hello David,
That looks like you may have very early software in your Axiom. The current software is Lighthouse 3.6, I think you might have as early as 3.0 (support for the Raymarine remote apps was added in 3.1.) You can check your version on the Getting Started tab in Settings, and if the software is old then you can update it either the over-the-air update process using a Wifi hot-spot (easiest, will need to download around 1Gb so be careful if using a portable hotspot/phone) or by downloading the software from http://www.raymarine.com.au/software-updates/mfds/lh3/axiom-axiompro/. Update instructions are on the same page.
Every new update adds features and fixes issues so we always recommend keeping up-to-date.
Tegards,
Tom