+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Autopilots (/forumdisplay.php?fid=23)
+--- Thread: [CA] [CA11] S3G AST Course Computer (E12092) (/showthread.php?tid=6283)
[CA11] S3G AST Course Computer (E12092) - sainted - 08-01-18 06:15 PM
Hi. I have the above referenced course computer, and it is good in every way except one.
One of motor output terminals, referenced as TB3 on the schematics for this unit, is badly corroded. Thus, I would like to replace it.
Can any one tell me if said terminal is available. I believe your part number is 07395. I know that the OE is still making it, but I would have to buy 100 of them from a distributor. I only need one.
Thanks!
RE: [CA11] S3G AST Course Computer (E12092) - Chuck - Raymarine - Moderator - 08-03-18 02:49 PM
Welcome to the Raymarine Forum sainted,
Unfortunately, Raymarine had never offered this item as a separate part which may have been purchased by customers. In cases where the terminal block had required replacement, the entire circuit board was replaced. Unfortunately, the latter is no longer available.