Raymarine forum
[CA] [CA11] Installation question - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: General Discussions (/forumdisplay.php?fid=2)
+--- Thread: [CA] [CA11] Installation question (/showthread.php?tid=6402)



[CA11] Installation question - mhl - 08-15-18 11:59 PM

Hi

the owner of the company i work for have tasked me with installing the following on his boat:

Raymarine Axium 12" plotter
Raymarine Quantom radome
Ray60 VHF Radio
Ray Mic duplo

is it resonabel easy to install or does it require someone that knows what their doing?

regards
Martin


RE: [CA11] Installation question - Chuck - Raymarine - Moderator - 08-31-18 01:51 PM

Welcome to the Raymarine Forum Martin,

This is a very subjective question, as electrical and mechanical skills of vary widely among people. As far as interfacing the products to one another and supplying power to the equipment, these products require basic knowledge of DC electrical circuits to interface and power the equipment. If you find that you're in over your head, then it would be recommended that a Certified Raymarine Installer be contacted to perform the installation.