+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] [CA11] Axiom pro Yanmar engine data (/showthread.php?tid=6405)
[CA11] Axiom pro Yanmar engine data - Mooseboat - 08-16-18 10:26 AM
How do I see Yanmar 4JH57 engine data on my Axiom pro? I have purchased ECI-100 and Device net T connector. What else do I need? What do I plug it into? Any advice or info would be greatly appreciated.
RE: [CA11] Axiom pro Yanmar engine data - Chuck - Raymarine - Moderator - 08-31-18 01:36 PM
Welcome to the Raymarine Forum Mooseboat,
The MFD and NMEA 2000 side of the ECI-100 are each designed to be interfaced as spurs to a powered and properly terminated SeaTalkng / NMEA 2000 backbone. Please click here to view the web page addressing how the engine side of the ECI-100 would be interfaced to the Yanmar engine. Further information on connecting the engine side of the ECI-100 would be interfaced to the Yanmar engine may be found within Chapter 4.6 - Yanmar engine connections of the ECI-100 Installation Instructions.