Raymarine forum
[CA] [CA11] Controlling multiple stereo heads - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] [CA11] Controlling multiple stereo heads (/showthread.php?tid=6452)



[CA11] Controlling multiple stereo heads - dtfeld - 08-22-18 08:27 AM

I am wondering if I can control 2 or more Fusion stereo heads from 1 a128 MFD.

I’m considering the Apollo, and AV755 models. I am looking to have 2 separate zones/separate sources. One for above deck/cockpit, and one for delowdeck/salon, each connected to a TV.

Would each unit have its own icon onscreen?


RE: [CA11] Controlling multiple stereo heads - Chuck - Raymarine - Moderator - 08-22-18 10:18 AM

Welcome to the Raymarine Forum dtfeld,

While it is possible to interface more than one compatible Fusion entertainment system to a MFD running LightHouse II software, the system will only support controlling one of the Fusion entertainment systems at any time. Selection over which Fusion entertainment system will be controlled by the app performed via the command sequence MENU->SETTINGS->SELECT FUSION SYSTEM.


RE: [CA11] Controlling multiple stereo heads - dtfeld - 08-26-18 07:09 AM

How will the new Fusion Apollo PartyBus system be handled? The idea ois there are multiple zones, each capable of playing from it own source. I assume there will have to be a new app or update for this system?


RE: [CA11] Controlling multiple stereo heads - Chuck - Raymarine - Moderator - 08-27-18 08:29 AM

dtfeld,

Raymarine's a/c/e-Series MFDs are exclusively designed to run LightHouse II software. Unlike the Audio app found within LightHouse 3, the Fusion app within LightHouse II software has not been designed support the Fusion Apollo PartyBus system (multiple zones, each capable of playing from it own source).