+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Autopilots (/forumdisplay.php?fid=23)
+--- Thread: [CA] [CA11] SPX-10 replacement (/showthread.php?tid=6506)
[CA11] SPX-10 replacement - lkreissl - 08-28-18 11:22 AM
I have a cruiser with the spx-10 autopilot installed. I have a fluxgate fault and the fluxgate ohms checks good. The auto pilot will not turn off and displays a constant fault on the c-series 125 plotter also.
Rather than sending the components in for repair and the cost entailed, I am thinking of upgrading the system instead of attempting to repair the old one.
Would the ev-150 be a good replacement? Can I use the current type-1 hydraulic drive with it? I also have a smartcontroller remote connected, will it work with the ev-150?
RE: [CA11] SPX-10 replacement - Chuck - Raymarine - Moderator - 08-29-18 02:28 PM
Welcome to the Raymarine Forum lkreissl,
Should the vessel feature a Type 1 Hydraulic Pump and a 12VDC power distribution system, then a T70407 EV-150 Corepack (p70Rs autopilot controller, EV1 Sensor Core, ACU150 Actuator Control Unit, and an Evolution autopilot cabling kit) would be recommended.