+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Product and Feature Suggestions (/forumdisplay.php?fid=128)
+--- Thread: [CA] [CA11] Accessing wind vane mode directly from Axiom MFD (/showthread.php?tid=6755)
[CA11] Accessing wind vane mode directly from Axiom MFD - estrace - 10-11-18 03:14 AM
As more and more boaters use Axiom MFD’s on sailing boats, are you considering making direct access to wind vane mode directly from the Axiom MFD??
The present wind vane mode being only accessible from the pilot controller is not very convenient on sailing boats, specially for bigger ones where the MFD is inside at the chart table and the pilot controller is outside at the helm position
Thanks for passing this suggestion to your engineers
Best regards
Serge CAMPLAN
RE: [CA11] Accessing wind vane mode directly from Axiom MFD - Chuck - Raymarine - Moderator - 10-11-18 09:48 AM
Welcome to the Raymarine Forum Serge,
Thanks for the feature suggestion. A feature request will be logged accordingly to consider this feature for inclusion within a future LightHouse 3 software update as well as the software within any future MFD designs.
Please click here more information concerning product and feature suggestions.