Raymarine forum
[TG] [TG11] RD424 E52067 Compatibolity with eS128 - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Radar (/forumdisplay.php?fid=125)
+--- Thread: [TG] [TG11] RD424 E52067 Compatibolity with eS128 (/showthread.php?tid=6770)



[TG11] RD424 E52067 Compatibolity with eS128 - ambyn1@gmail.com - 10-13-18 03:10 PM

Is the RD424 E52067 radome compatible with the eS128 MFD?


RE: [TG11] RD424 E52067 Compatibility with eS128 - Tom - Raymarine - Moderator - 10-15-18 01:46 AM

Sorry, that's an analogue radome, whereas all of our multifunction displays after E-series Classic require digital radars. eS128 can use any of our Digital radome, HD Digital radome, HD or SHD Open Array, Magnum Open Array (limited features) or Quantum 1 radars.

Regards,
Tom


RE: [TG11] RD424 E52067 Compatibolity with eS128 - ambyn1@gmail.com - 10-15-18 10:44 AM

Is there a digital version of the RD424?

The outside of the dome that I am looking at has "Digital" on it and the owner says that it has the ethernet connection. I've attached pictures from Craigs List.

I can't figure out how to attach the pictures. Here is the Craigs list address.

https://washingtondc.craigslist.org/nva/bpo/d/raymarine-24-4kw-radar-dome/6711399382.html

Thanks,

Amby N


RE: [TG11] RD424 E52067 Compatibolity with eS128 - ambyn1@gmail.com - 10-16-18 02:06 PM

(10-15-18 01:46 AM)Tom - Raymarine - Moderator Wrote:  Sorry, that's an analogue radome, whereas all of our multifunction displays after E-series Classic require digital radars. eS128 can use any of our Digital radome, HD Digital radome, HD or SHD Open Array, Magnum Open Array (limited features) or Quantum 1 radars.

Regards,
Tom

Tom,

Did you get my reply from yesterday?

Amby N


RE: [TG11] RD424 E52067 Compatibolity with eS128 - Tom - Raymarine - Moderator - 10-17-18 01:09 AM

Hello Amby,

That listing says RD424D, which is compatible. E62067 is an RD424 without the D. E52067 is not compatible, RD424D (part E92131, E92132 or T70167.) The D in the model name is important, it means Digital. Where did the part number you quoted, E52067 come from?
The cable in the photo is a digital scanner cable, if the info in the ad is legitimate then that is compatible with eS128.

Tom